You can use INOGENI multi-camera mixers or switchers with Q-SYS Core processors.

The dual HDMI/USB camera mixers SHARE2, SHARE2U and CAM300 4x camera switcher are now integrated with the Q-SYS™ Platform, providing USB and HDMI multi-camera mixing capabilities. With robust control modules and seamless integration available within using the Q-SYS Designer® Asset Manager, this integration offers reduced integration time and greater flexibility for video processing solutions. Check out the detailed documentation for each plugin and enjoy seamless integration with Q-SYS solutions.

Read the application notes on Q-SYS Core for:

• SHARE2       Mix 2 HDMI/DVI cameras to USB 3.0
• SHARE2U    Mix 2 USB or HDMI cameras to USB 3.0
• CAM300         Switch 4 video camera (2USB and 2HDMI)

We designed an application in order to control SHARE2/2U or CAM series devices using the USB or LAN interface. You can get the INOGENI Control App in the Support – Software tools section of this website.

Yes, these modules are available under the Support – Software tools section of our website.

Yes, the SHARE2 and all INOGENI converters are compatible with this software.

Using StarLeaf, you will need to have access to the switches below the device. Set SW1 to the ON position, power-cycle the unit and close / reopen StarLeaf software in order for changes to take effect.

Yes. All of our devices are supported by the ClickShare. ClickShare will capture video from our devices at 720p@30fps using MJPEG compression. Here are some details you might be interested.

For all our devices use USB 2.0 cables and extenders to ensure the use of MJPEG.

For SHARE2 and SHARE2U:

• You can plug the devices to any USB ports on the ClickShare device.
• The SHARE2 and SHARE2U can be used as an Audio Bridge to join microphone/speaker.
• To enable 720p set the DIP switch #1 to ON under the device

For CAM300:

• You can plug the devices to any USB ports on the ClickShare device.
• You cannot use the CAM300 as a speakerphone. Only video capture is available.
• To enable 720p set the DIP switch #1 to ON under the device

For 4KXUSB3 & 4KX-PLUS:

• You must plug the device to the USB-C port on the ClickShare device.
• You can use the 4KXUSB3 as an Audio Bridge to join the microphone/speaker.

For 4K2USB3, HD2USB3 and SDI2USB3:

• You must plug the device to the USB-C port on the ClickShare device.
• You cannot use the devices as a speakerphone. Only video capture is available.

Yes. All of our devices are supported by the Kramer Connect2. Our devices can be used as a CAM300 inside Zoom and Teams apps.

*Slight detail for SHARE2U, SHARE2 and CAM300300, in order to use with Teams, make sure DIPSW#1 is ON to enable 720p video capture.

Below the device, there are switches. You need to turn on SW1 and power cycle the unit in order to make it work with GoToMeeting.

This switch allows you to support multiple video formats over USB like 720p and 1080p. When this switch is off, 1080p is the only format supported and GoToMeeting/Webex/StarLeaf does not seem to support 1080p. GoToMeeting/Webex/StarLeaf* supports 720p. The SW1 in OFF position is the default mode. We did that in order to have maximum quality over video conferencing softwares.

* Using StarLeaf, you will need to have access to the switches below the device. Set SW1 to the ON position, power-cycle the unit and close / reopen StarLeaf software in order for changes to take effect.

See below for audio routing

On the SHARE2/SHARE2U, since there is no AEC, the USB audio device is not detected as a speakerphone device, but as a digital audio input and speaker. This way the AEC of the soft codec, like Zoom or Teams will be enabled. An external DSP with AEC can also be used.

1. You have to make sure that you clicked on the Apply button in INOGENI’s Control App after you are done writing the new name.
2. You must carry out a power cycle of the device.
3. In the device manager, under Camera, right-click to erase the device. Then, complete a power cycle. The friendly name should appear.
4. In Microsoft Teams, you need to Quit the session. In the task bar, right-click on the Teams icon and select Quit (just closing the page won’t work). Zoom should be okay after the power cycle

The application running on PC will not be able to detect the connected camera when the INOGENI device is in the path. This is a hardware limitation.

You can use INOGENI multi-camera mixers or switchers with Q-SYS Core processors.

The dual HDMI/USB camera mixers SHARE2, SHARE2U and CAM300 4x camera switcher are now integrated with the Q-SYS™ Platform, providing USB and HDMI multi-camera mixing capabilities. With robust control modules and seamless integration available within using the Q-SYS Designer® Asset Manager, this integration offers reduced integration time and greater flexibility for video processing solutions. Check out the detailed documentation for each plugin and enjoy seamless integration with Q-SYS solutions.

Read the application notes on Q-SYS Core for:

• SHARE2       Mix 2 HDMI/DVI cameras to USB 3.0
• SHARE2U    Mix 2 USB or HDMI cameras to USB 3.0
• CAM300         Switch 4 video camera (2USB and 2HDMI)

ClickShare will automatically connect to the USB speakerphone as soon as it detects it. This will then remove audio from the HDMI output. This problem can be solved by disabling the USB audio interfaces on the INOGENI device.

All you have to do is uncheck “Host USB audio” box in our app under the “Audio” tab.

1. You have to make sure that you clicked on the Apply button in INOGENI’s Control App after you are done writing the new name.
2. You must carry out a power cycle of the device.
3. In the device manager, under Camera, right-click to erase the device. Then, complete a power cycle. The friendly name should appear.
4. In Microsoft Teams, you need to Quit the session. In the task bar, right-click on the Teams icon and select Quit (just closing the page won’t work). Zoom should be okay after the power cycle

The application running on PC will not be able to detect the connected camera when the INOGENI device is in the path. This is a hardware limitation.

You can use INOGENI multi-camera mixers or switchers with Q-SYS Core processors.

The dual HDMI/USB camera mixers SHARE2, SHARE2U and CAM300 4x camera switcher are now integrated with the Q-SYS™ Platform, providing USB and HDMI multi-camera mixing capabilities. With robust control modules and seamless integration available within using the Q-SYS Designer® Asset Manager, this integration offers reduced integration time and greater flexibility for video processing solutions. Check out the detailed documentation for each plugin and enjoy seamless integration with Q-SYS solutions.

Read the application notes on Q-SYS Core for:

• SHARE2       Mix 2 HDMI/DVI cameras to USB 3.0
• SHARE2U    Mix 2 USB or HDMI cameras to USB 3.0
• CAM300         Switch 4 video camera (2USB and 2HDMI)

By setting SW3 to the ON position below the device, you can set the device frame buffer frequency to 50Hz. This switch will also set the USB input capture to a valid frame rate in order to avoid any artifacts.