//============================================================================= INOGENI SHARE2U Release Notes //============================================================================= //============================================================================= Release Notes Version 1.15.12 - November 27, 2024 //============================================================================= - Correcting issue when setting DHCP with specific MAC address pattern. - Set full-range PCM volume on the connected speakerphone input. //============================================================================= Release Notes Version 1.15.11 - November 14, 2024 //============================================================================= - Updated GET command over IP interface to make it identical to the RS232 interface. //============================================================================= Release Notes Version 1.15.6 - November 5, 2024 //============================================================================= - Adding DHCP support. For configuration, use Control App v3.12.72 and higher. //============================================================================= Release Notes Version 1.15.3 - October 7, 2024 //============================================================================= - Correcting compatibility with AVer PTC310H camera. //============================================================================= Release Notes Version 1.15.1 - September 9, 2024 //============================================================================= - Increased stability. //============================================================================= Release Notes Version 1.15.0 - September 4, 2024 //============================================================================= - Increased stability. //============================================================================= Release Notes Version 1.14.15 - August 23, 2024 //============================================================================= - Bug fix where we could get black video over USB. - Adding feature to get system logs from the unit for future troubleshooting. - Support 100Mbps IP interface. //============================================================================= Release Notes Version 1.14.12 - July 9, 2024 //============================================================================= - Adding ENJPEGPARSE. - Adding workaround in case the device has an issue with its graphic adapter. //============================================================================= Release Notes Version 1.14.11 - June 20, 2024 //============================================================================= - Fix compatibility issue with AVer CAM540. //============================================================================= Release Notes Version 1.14.10 - May 29, 2024 //============================================================================= - Added function to get some debug status from the device. - Improved telnet communication. - Improved zoom relative control. - Corrected issue with Poly G7500 system and our latest video processor firmware. //============================================================================= Release Notes Version 1.14.9 - May 26, 2024 //============================================================================= - Added function to get some debug status from the device. //============================================================================= Release Notes Version 1.14.8 - May 21, 2024 //============================================================================= - Improved telnet communication. - Improved zoom relative control. - Corrected issue with Poly G7500 system and our latest video processor firmware. //============================================================================= Release Notes Version 1.14.6 - April 22, 2024 //============================================================================= - Adding the possibility to route the analog audio input to any of the HDMI, USB1, USB2 and analog audio outputs independently. - Allow 1920x1080 and 1024x768 resolutions over USB when DIP SW is activated. //============================================================================= Release Notes Version 1.14.3 - April 9, 2024 //============================================================================= - Corrected issue with video processor (Gen2) where the device would output black video. - Corrected issue where the device would wake up cameras when the device is in standby mode. //============================================================================= Release Notes Version 1.14.2 - March 18, 2023 //============================================================================= - Corrected minor issue with ALF-CAM camera. //============================================================================= Release Notes Version 1.14.0 - December 1, 2023 //============================================================================= - Corrected minor issue with top/bottom layout. - Corrected minor issue with PTZ control over USB3 interface. - Added support for PTZ control over Q-SYS plugin. - Adding compatibility with innex cube and C570 cameras. - Adding compatibility with Logitech CollabOS over USB2.0 interface. //============================================================================= Release Notes Version 1.13.17 - November 29, 2023 //============================================================================= - Adding Panasonic AW-UE50 camera support. //============================================================================= Release Notes Version 1.13.15 - November 24, 2023 //============================================================================= - Solve issue with NetworkTV NTV71C camera. - Add GATEWAY RS232 command - Add GATEWAY and NETMASK IP command //============================================================================= Release Notes Version 1.13.14 - November 20, 2023 //============================================================================= - Solve issue with Birddog PF120 camera. //============================================================================= Release Notes Version 1.13.13 - November 3, 2023 //============================================================================= - Adding relative controls (up to -10 to 10) on zoom command in the API. Absolute zoom control (100 to 500) is preserved. //============================================================================= Release Notes Version 1.13.11 - October 3, 2023 //============================================================================= - Adding support for Birddog P110 camera. //============================================================================= Release Notes Version 1.13.10 - September 22, 2023 //============================================================================= - Improved audio quality over analog I/O and USB connections. //============================================================================= Release Notes Version 1.13.9 - September 11, 2023 //============================================================================= - Set PCM volume to maximum. - Corrected issue with Huddly Canvas. //============================================================================= Release Notes Version 1.13.5 - August 30, 2023 //============================================================================= - Adding temperature status on firmware. //============================================================================= Release Notes Version 1.13.4 - July 21, 2023 //============================================================================= - Fix issue where an application trying to get video while device is booting could prevent the device from booting properly - Fix issue with Logitech Roommate over usb2 //============================================================================= Release Notes Version 1.13.3 - July 12, 2023 //============================================================================= - Added BLANK command to disable HDMI output so it does not send a 5V supply to the HDMI sink. //============================================================================= Release Notes Version 1.13.2 - June 21, 2023 //============================================================================= - Added support for Birddog P100 camera. //============================================================================= Release Notes Version 1.13.1 - May 17, 2023 //============================================================================= - Correcting HDMI sync issue with specific source and HDMI cables. //============================================================================= Release Notes Version 1.13.0 - May 9, 2023 //============================================================================= - Corrected minor issue for updating status to USB controller. //============================================================================= Release Notes Version 1.12.34 - April 24, 2023 //============================================================================= - Solved issue where the device would output black video. //============================================================================= Release Notes Version 1.12.25 - February 9, 2023 //============================================================================= - Support for Newline TC-4Y20 camera. //============================================================================= Release Notes Version 1.12.24 - January 20, 2023 //============================================================================= - Telnet connection now supports multiple clients. //============================================================================= Release Notes Version 1.12.21 - December 12, 2022 //============================================================================= - Correcting control command issues. - Improved keypad responsiveness. //============================================================================= Release Notes Version 1.12.20 - December 8, 2022 //============================================================================= - Fix red shift over video. //============================================================================= Release Notes Version 1.12.19 - November 14, 2022 //============================================================================= - Fix audio saturation issue with the USB cameras. //============================================================================= Release Notes Version 1.12.19 - November 7, 2022 //============================================================================= - Corrected issue with audio capture. //============================================================================= Release Notes Version 1.12.18 - November 2, 2022 //============================================================================= - Corrected issue with Benq DVY23 camera. //============================================================================= Release Notes Version 1.12.17 - October 28, 2022 //============================================================================= - Corrected issue with AVer VB342 Pro. //============================================================================= Release Notes Version 1.12.16 - October 11, 2022 //============================================================================= - Corrected issue with Lumens VC-TR1 freezing issue. //============================================================================= Release Notes Version 1.12.15 - September 13, 2022 //============================================================================= - Corrected issue with AverMedia capture card. - Corrected issue with HDMI switching. //============================================================================= Release Notes Version 1.12.13 - August 15, 2022 //============================================================================= - Adding support for newer hardware. //============================================================================= Release Notes Version 1.12.11 - July 8, 2022 //============================================================================= - Adding support for AVer CAM550 camera. Please install firmware on the AVer CAM550 camera >= 0.0.8000.62. //============================================================================= Release Notes Version 1.12.10 - June 22, 2022 //============================================================================= - Correcting issue with Meeting Owl Pro camera. Will decode at 720p using this camera. //============================================================================= Release Notes Version 1.12.7 - June 17, 2022 //============================================================================= - Correcting issue with HuddleCamHD SimplTrack2 camera. Audio capture is not supported //============================================================================= Release Notes Version 1.12.5 - June 16, 2022 //============================================================================= - Correcting issue with 1080i formats. - Fix issue if USB cameras are only support 1080p only. //============================================================================= Release Notes Version 1.12.3 - April 19, 2022 //============================================================================= - Solved issue with HDMI audio. //============================================================================= Release Notes Version 1.12.2 - April 11, 2022 //============================================================================= - Fix issue with Unite 150/200 cameras where it would freeze video. //============================================================================= Release Notes Version 1.12.1 - March 18, 2022 //============================================================================= - Fix issues where settings are getting changed at random. - Improve stability of hdmi input. //============================================================================= Release Notes Version 1.11.2 - January 31, 2022 //============================================================================= - Adding support for presets control on CAM520 camera. //============================================================================= Release Notes Version 1.11.1 - December 21, 2021 //============================================================================= - Corrected issue under USB2.0 where signals drops after a couple of minutes. - Corrected issue with API regarding PTZ control. //============================================================================= Release Notes Version 1.11.0 - November 4, 2021 //============================================================================= - Corrected problem with audio where it does not get back after a video stop over USB. //============================================================================= Release Notes Version 1.10.31 - October 26, 2021 //============================================================================= - Adding new USB controller firmware to improve communication. - Improved USB camera compatibility. - Corrected issue where video coming from USB interface gets corrupted when switching between USB2 and USB3 connections. - Corrected issue where configuration settings can change during runtime. //============================================================================= Release Notes Version 1.10.29 - October 7, 2021 //============================================================================= - Adding fix for AVer CAM520 Pro2. - Adding support for new flash for production. //============================================================================= Release Notes Version 1.10.28 - September 23, 2021 //============================================================================= - Reducing video resolution capture for uncompressed video. - Supporting aspect ratios different than 16:9. //============================================================================= Release Notes Version 1.10.27 - September 23, 2021 //============================================================================= - Correcting issue with Lumens VC-TR1 VideoCamera. //============================================================================= Release Notes Version 1.10.24 - September 20, 2021 //============================================================================= - Correcting issue when PTZ Pro 2 camera is not calling presets. //============================================================================= Release Notes Version 1.10.23 - September 17, 2021 //============================================================================= - Correcting issue when connecting to HDMI cameras. - Correcting issue where HDMI camera does not show sometimes. //============================================================================= Release Notes Version 1.10.21 - September 17, 2021 //============================================================================= - Correcting issue with vertical alignment when HDMI input is connected to HDMI switchers. //============================================================================= Release Notes Version 1.10.19 - September 15, 2021 //============================================================================= - Adding support for Yealink UVC30 & UVC84 cameras. //============================================================================= Release Notes Version 1.10.18 - September 10, 2021 //============================================================================= - Reduced YUYV resolution over USB2.0 to accomodate for the less USB bandwidth. //============================================================================= Release Notes Version 1.10.17 - September 7, 2021 //============================================================================= - Problem with PTZOptics PT12X-USB-GY-G2. Disable audio capture from camera. //============================================================================= Release Notes Version 1.10.15 - August 18, 2021 //============================================================================= - Correcting issue with 1080i HDMI source when there is only one source connected to device. //============================================================================= Release Notes Version 1.10.14 - August 11, 2021 //============================================================================= - Adding more fluid PTZ control for AVer cameras. - Adding preset controls for AVer CAM520 / CAM520 Pro cameras through our API. - Correcting issue where IP address is not saved when setting it. - Audio mixing feed going to computer is doubled to increase audio loudness. //============================================================================= Release Notes Version 1.10.10 - May 31, 2021 //============================================================================= - Corrected audio issue where it would not show up after a couple of days. - Corrected minor issue with get/set preset functions - Corrected minor issue when capturing from HDMI input only. - Corrected issue where on some USB hosts, the video would freeze due to USB data corruption. //============================================================================= Release Notes Version 1.10.8 - April 21, 2021 //============================================================================= - Added standby mode. - When there is no application connected to device, it will enter a standby mode. This is only effective if there is no HDMI output detected. - Corrected issue with the HuddlyCamHD 20x-GY-G2. - Adding new audio routing for SHARE2U and CAM300. See user guide. - Adding friendly name setting. //============================================================================= Release Notes Version 1.10.4 - February 16, 2021 //============================================================================= - Increased PTZ functionality with specific cameras: - HuddleCam HD10X - Minnray UV510 //============================================================================= Release Notes Version 1.10.2 - February 8, 2021 //============================================================================= - Correcting issue with PanaCast camera. //============================================================================= Release Notes Version 1.10.1 - February 1, 2021 //============================================================================= - Adding support for Trust camera. //============================================================================= Release Notes Version 1.10.0 - January 27, 2021 //============================================================================= - Adding support for next PCB revision. - Correcting issue with video processor booting. //============================================================================= Release Notes Version 1.9.55 - January 14, 2021 //============================================================================= - Corrected return codes for RS232 commands. //============================================================================= Release Notes Version 1.9.54 - January 14, 2021 //============================================================================= - Firmware for production. //============================================================================= Release Notes Version 1.9.53 - January 11, 2021 //============================================================================= - Support horizontal and vertical flip on USB and HDMI inputs. - Fixed some issue with audio input mute status. //============================================================================= Release Notes Version 1.9.52 - December 22, 2020 //============================================================================= - Adding customized function to star button (*) on keypad. When set through Control App, you can mute all audio inputs. You can set the behavior inside device. //============================================================================= Release Notes Version 1.9.51 - December 2, 2020 //============================================================================= - Corrected issue with LAN interface. //============================================================================= Release Notes Version 1.9.50 - November 26, 2020 //============================================================================= - Correcting issue with audio where it does not show up after couple of days. //============================================================================= Release Notes Version 1.9.48 - November 19, 2020 //============================================================================= - Custom version for customer. //============================================================================= Release Notes Version 1.9.48 - November 4, 2020 //============================================================================= - Corrected issue with Minnray UV510A PTZ control. - Corrected issue with Jabra PanaCast camera. //============================================================================= Release Notes Version 1.9.44 - October 30, 2020 //============================================================================= - Corrected issue with HuddleCamHD cameras. //============================================================================= Release Notes Version 1.9.43 - October 28, 2020 //============================================================================= - Support for 1080i, 576i and 480i over HDMI input. //============================================================================= Release Notes Version 1.9.42 - October 23, 2020 //============================================================================= - Support for Telycam TLC-300-U3S camera. Capture only at 640x360 over USB 2.0. //============================================================================= Release Notes Version 1.9.41 - October 23, 2020 //============================================================================= - Support for Telycam TLC-300-U3S camera. Capture only at 960x540 over USB 2.0. //============================================================================= Release Notes Version 1.9.40 - October 19, 2020 //============================================================================= - Adding support for Minnray UV510A camera. //============================================================================= Release Notes Version 1.9.39 - October 8, 2020 //============================================================================= - Corrected issue with audio pipelining. - Added support for Minnray UV515 camera. //============================================================================= Release Notes Version 1.9.37 - October 2, 2020 //============================================================================= - Corrected issue for customer using Gefen 4K Matrix. //============================================================================= Release Notes Version 1.9.36 - September 14, 2020 //============================================================================= - Added production features. //============================================================================= Release Notes Version 1.9.35 - September 10, 2020 //============================================================================= - Added support for Jabra Link 380. //============================================================================= Release Notes Version 1.9.32 - August 26, 2020 //============================================================================= - Support for new HDMI receiver source. //============================================================================= Release Notes Version 1.9.31 - August 26, 2020 //============================================================================= - Corrected issue with HuddleCamHD camera. //============================================================================= Release Notes Version 1.9.30 - August 18, 2020 //============================================================================= - Improved HDMI switching. - Adding keypad support. - Improved audio capture. //============================================================================= Release Notes Version 1.9.26 - July 9, 2020 //============================================================================= - Adding production features. //============================================================================= Release Notes Version 1.9.25 - June 23, 2020 //============================================================================= - Support for PTZ Optics 12X-USB camera. //============================================================================= Release Notes Version 1.9.24 - June 22, 2020 //============================================================================= - Corrected problem with USB audio output with Crestron UC-SB1-CAM camera. //============================================================================= Release Notes Version 1.9.23 - June 1, 2020 //============================================================================= - Adding PTZ controls through LAN interface. See user guide for complete function description and how to use them. //============================================================================= Release Notes Version 1.9.22 - May 21, 2020 //============================================================================= - Correcting issue with new keypad. //============================================================================= Release Notes Version 1.9.21 - May 8, 2020 //============================================================================= - Adding support for new keypad. - Support 1080p over USB by default. This forces application to take best quality video over USB. DIPSW1 is OFF by default to enable this mode. Turn DIPSW1 to ON to get back to older mode where 1080p, 720p and 480p are enabled over USB. //============================================================================= Release Notes Version 1.9.19 - April 30, 2020 //============================================================================= - Corrected issue where audio is not up and running after HDMI output is disconnected. //============================================================================= Release Notes Version 1.9.18 - April 29, 2020 //============================================================================= - HDMI output gets audio from computer and no longer receives audio from USB cameras and analog input. This creates feedback. //============================================================================= Release Notes Version 1.9.16 - March 12, 2020 //============================================================================= - Corrected issue where device will not show HDMI input. - Added top-bottom layout. //============================================================================= Release Notes Version 1.9.15 - March 12, 2020 //============================================================================= - Adding RS232 commands for preset setting for Rally, PTZ Pro 2 and Meetup cameras. Go to a predefined preset: where: X = 1, for USB1 = 2, for USB2 Y = 1 to 3, for preset 1, 2 and 3 Save a preset: where: X = 1, for USB1 = 2, for USB2 Y = 1 to 3, for preset 1, 2 and 3 //============================================================================= Release Notes Version 1.9.14 - March 10, 2020 //============================================================================= - Corrected issue with Meeting Owl Pro. //============================================================================= Release Notes Version 1.9.12 - February 28, 2020 //============================================================================= - Adding RS232 commands for PTZ control. where: X = 1, for USB1 = 2, for USB2 Y = -1, counterclockwise = 0, stop = 1, clockwise X = 1, for USB1 = 2, for USB2 Y = -1, for counterclockwise = 0, stop = 1, clockwise X = 1, for USB1 = 2, for USB2 Y = 100 to 500 //============================================================================= Release Notes Version 1.9.11 - February 24, 2020 //============================================================================= - Adding support for speakerphones. The audio is captured from the device. Audio output of the SHARE2U is sent to this kind of the device as well. //============================================================================= Release Notes Version 1.9.10 - January 29, 2020 //============================================================================= - Corrected issue with webpage in Safari. //============================================================================= Release Notes Version 1.9.8 - January 17, 2020 //============================================================================= - Corrected issue where device gets a black screen. //============================================================================= Release Notes Version 1.9.7 - November 28, 2019 //============================================================================= - Solved bug with UART and LAN interfaces. - Solved compatibility issue with Microsoft Lifecam camera. //============================================================================= Release Notes Version 1.9.6 - November 27, 2019 //============================================================================= - Solved bug with camera detection. - Added MJPEG functionality over USB 2.0. //============================================================================= Release Notes Version 1.9.5 - November 8, 2019 //============================================================================= - Adding production feature. //============================================================================= Release Notes Version 1.9.4 - October 30, 2019 //============================================================================= - Corrected compatibility issue with Logitech Brio camera. //============================================================================= Release Notes Version 1.9.1 - October 24, 2019 //============================================================================= - Corrected minor issue with audio capture. //============================================================================= Release Notes Version 1.9.0 - October 22, 2019 //============================================================================= - Adding audio mixing and gain control. - Adding support for HuddlyGo camera. - Corrected issue with AdobeConnect application. //============================================================================= Release Notes Version 1.8.11 - September 9, 2019 //============================================================================= - Corrected issue with HDMI output. //============================================================================= Release Notes Version 1.8.9 - August 13, 2019 //============================================================================= - Modified web page. //============================================================================= Release Notes Version 1.8.8 - July 4, 2019 //============================================================================= - Corrected audio input capture issue with USB camera. //============================================================================= Release Notes Version 1.8.7 - June 7, 2019 //============================================================================= - Corrected audio input capture issue with USB camera. //============================================================================= Release Notes Version 1.8.6 - June 7, 2019 //============================================================================= - Added status of analog input. //============================================================================= Release Notes Version 1.8.5 - April 2, 2019 //============================================================================= - Added support for EagleEye IV USB PTZ camera. //============================================================================= Release Notes Version 1.8.4 - April 2, 2019 //============================================================================= - Added support for inverted inputs. //============================================================================= Release Notes Version 1.8.3 - February 27, 2019 //============================================================================= - Adding support for USB audio speakers. The audio OUT data going to the SHARE2U will be directed to analog out and USB audio speakers if they are available. - Blacking framebuffer when CPU is powered up and restarted. //============================================================================= Release Notes Version 1.8.2 - February 15, 2019 //============================================================================= - Corrected issue where audio capture is not working at power up. //============================================================================= Release Notes Version 1.8.1 - January 28, 2019 //============================================================================= - Corrected issue where audio capture is not working at power up. //============================================================================= Release Notes Version 1.8.0 - November 28, 2018 //============================================================================= - Added PTZ relative control over USB cameras. //============================================================================= Release Notes Version 1.7.6 - November 7, 2018 //============================================================================= - Corrected problem where the HDMI stream blocks the pipeline. //============================================================================= Release Notes Version 1.7.4 - November 7, 2018 //============================================================================= - Corrected problem where the HDMI stream blocks the pipeline. - Added HID control support for all view modes over USB. //============================================================================= Release Notes Version 1.7.3 - October 15, 2018 //============================================================================= - Adding LAN beacon that sends device info like application version, IP and MAC addresses at 239.245. port 45454. //============================================================================= Release Notes Version 1.7.2 - September 5, 2018 //============================================================================= - Corrected frame buffer issue where the device outputs no video. //============================================================================= Release Notes Version 1.7.1 - August 30, 2018 //============================================================================= - Enabling watchdog. //============================================================================= Release Notes Version 1.7.0 - August 30, 2018 //============================================================================= - Improved video quality. - Increased programming time. - Video input is reconfigured each time there is a format change on the application side. This way, we avoid any video scaling. //============================================================================= Release Notes Version 1.6.7 - July 13, 2018 //============================================================================= - Adding buttons to control on the web home page. //============================================================================= Release Notes Version 1.6.6 - June 14, 2018 //============================================================================= - Corrected issue where application is always restarting. - Corrected issue where there is no video at bootup. - Corrected issue with the SHARE2U and CAM300 setup. //============================================================================= Release Notes Version 1.6.5 - June 13, 2018 //============================================================================= - Corrected issue with HDMI output. - Reconfigure HDMI input when width and height are different. //============================================================================= Release Notes Version 1.6.4 - June 11, 2018 //============================================================================= - Added support for daisy chaining of CAM and SHARE2U. //============================================================================= Release Notes Version 1.6.3 - May 30, 2018 //============================================================================= - Added support for Crestron modules. //============================================================================= Release Notes Version 1.6.2 - May 29, 2018 //============================================================================= - Corrected issue with HDMI input. //============================================================================= Release Notes Version 1.6.1 - May 28, 2018 //============================================================================= - Corrected issue with HDMI input. //============================================================================= Release Notes Version 1.6.0 - May 18, 2018 //============================================================================= - Added audio mixing feature where USB inputs and HDMI input are mixed together. - The audio follows the input. - Added support for LAN interface. - Added watchdog timer in order to recover from system lockup. //============================================================================= Release Notes Version 1.5.9 - May 2, 2018 //============================================================================= - Added support for reset command over LAN and RS232. //============================================================================= Release Notes Version 1.5.8 - April 11, 2018 //============================================================================= - Corrected issue with Ethernet switch. Now the ethernet link is 10Mbps/Full. //============================================================================= Release Notes Version 1.5.7 - March 15, 2018 //============================================================================= - Increase loading time. //============================================================================= Release Notes Version 1.5.6 - March 15, 2018 //============================================================================= - Support for new keypad. - HDMI input led will blink when format is not supported. //============================================================================= Release Notes Version 1.5.3 - February 20, 2018 //============================================================================= - Added static IP assignment. - Added HTTP request support. //============================================================================= Release Notes Version 1.5.2 - February 12, 2018 //============================================================================= - Corrected issue where no frame rate for specific camera is selected. - Corrected issue where there is only one resolution is supported by format, which leads to problems. //============================================================================= Release Notes Version 1.5.1 - January 30, 2018 //============================================================================= - Added support for remote commands. //============================================================================= Release Notes Version 1.5.0 - January 19, 2018 //============================================================================= - By setting SW3 at the bottom of the device, you can set the frame rate of the frame buffer in order to avoid power line artifacts. SW3 ON: 50Hz SW3 OFF: 60Hz (default) - The frame rate of the camera will be set accordingly. - The current configuration is now saved onboard. //============================================================================= Release Notes Version 1.4.7 - January 5, 2018 //============================================================================= - Adding status on video inputs. - Accept different USB input frame rates. //============================================================================= Release Notes Version 1.4.5 - December 15, 2017 //============================================================================= - Corrected HDMI inputs where bars could be shown on HDMI feeds. //============================================================================= Release Notes Version 1.4.4 - December 14, 2017 //============================================================================= - Corrected issue where faults could happen when switching HDMI inputs. //============================================================================= Release Notes Version 1.4.2 - December 13, 2017 //============================================================================= - Corrected HDMI drive. //============================================================================= Release Notes Version 1.4.1 - December 4, 2017 //============================================================================= - Corrected issue with HDMI input. //============================================================================= Release Notes Version 1.4.0 - December 4, 2017 //============================================================================= - Added H264 and uncompressed compatibility. - Added UART suppoort. //============================================================================= Release Notes Version 1.3.7 - November 14, 2017 //============================================================================= - Added control over USB. - Added module status to USB controller. //============================================================================= Release Notes Version 1.3.3 - November 14, 2017 //============================================================================= - Corrected issue where audio is not detected properly when there is no HDMI output. //============================================================================= Release Notes Version 1.3.2 - November 13, 2017 //============================================================================= - Corrected issue with HDMI input. - Corrected issue where the application stops working. //============================================================================= Release Notes Version 1.2.0 - November 3, 2017 //============================================================================= - Added UART and LAN control. //============================================================================= Release Notes Version 1.0.7 - October 5, 2017 //============================================================================= - First release of this product //============================================================================= Release Notes Version 1.0.6 - October 4, 2017 //============================================================================= - First release of this product.