Get all the technical specs you need for the TOGGLE USB 3.0 switcher.
TOGGLE USB Switcher connect to three USB 3.0 devices and can switch them between two hosts. It will switch automatically to a laptop when it is connected, and revert back to the room pc when disconnected. It can also be controlled remotely by RS-232 or GPI.
USB device ports Connector & Video Resolutions
3 x Type-A USB 3.0/2.0 compatible
USB host ports Connector & Video Resolutions
2 x Type-B USB 3.0/2.0 compatible
Automatic, manual or remote control. Current configuration is saved onboard.
Barco ClickShare compatible
Compatible with Barco ClickShare Conference (CX-20, CX-30 & CX-50)
Baud rate: 9600 bps For control purpose. See Serial communication protocol section for more details.
Physical switch to select host.
Contact-closure control. Controlled by open-drain IO (short to ground) or driven IO. Supported voltage range: 0V to +12V max. Voltage threshold is 2.3V.
Device current limit
1.8A shared current limit for all 3 x USB device ports. You can monitor current consumption through RS-232 and our Control App.
Dimensions (W x L x H)
7.0cm x 8.3cm x 2.3cm
2.75” x 3.25” x 0.9”
12V (100-240 VAC 50/60Hz to 12V/1.2A DC)
113g (0.25 lb)
2x 3 ft USB 3.0 cables (Type-A to Type-B)
1x RS-232 terminal block adapter
1x power supply 100-240 VAC 50/60Hz to 12V/1.2A DC
International adapters included in the box (AUS, EUR, UK and US)
0° to 45° C
32° to 113° F
-40° to 105° C
-40° to 221° F
0% to 90% non-condensing
FCC, CE, RoHS, IEC62368, SoV, RCM, KC