Get all the technical specs you need for the SHARE2U Dual USB Camera to USB 3.0 Camera Mixer.
Main feature
2:1 Camera mixer
2:1 Camera mixer
(1x USB and 1x USB or HDMI cameras mixer into a single USB 3.0 interface)
Simultaneous capture and mix of 2x USB 2.0 signals + Audio into one 1080p60 USB 3.0 signal.
14 mix setup videos:
Picture-in-picutre, side-by-side
Video input
#1 Connector & video resolutions
1x USB camera 2.0
MJPEG or H264 (*)
Depends on the camera specifications
#2 Connector & video resolutions
1x USB camera 2.0
MJPEG or H264 (*)
Depends on the camera specifications
– OR –
1x HDMI
1080p60, 1080p30, 720p60 and 480p60
(1080p60 supported for S/N greater than SU2111xxx and SUM111xxx)
1080p notes for MJPEG and H264
Color space
HDMI : RGB, YCbCr 4:4:4 and 4:2:2
Video output
HDMI
1x HDMI up to 1080p60
(One mixed video stream)
USB
1x USB 3.0 uncompressed up to 1080p60
(One mixed video stream)
USB - Color Space ou CODEC
USB 3.0: YCbCr (YUY2) 4:2:2 8-bit.
USB 2.0: MJPEG
USB - Video scaler
Automatic hardware-based
USB - Color space conversion
Automatic hardware-based
USB - Sampling conversion
Automatic hardware-based
USB - Frame rate conversion
Automatic hardware-based
Audio
Analog audio connections
Unbalanced analog stereo, line level, 3.5 mm jack
Analog audio I/O
2-channel LPCM 48kHz audio from line input
Digital audio I/O
Embedded in HDMI or USB
Audio routing
See following link for SHARE2 and SHARE2U audio routing
Control
Control options
Integrated keypad, LAN, USB-HID, INOGENI REMOTE, RS-232
IP interface
10 Mbps
Static address configuration through our Control App
DHCP not supported
USB Port
USB expansion port
Two (2) extra USB 3.0 ports for expansion purposes. The devices connected will appear to the host.
Compatibility
Barco ClickShare Conference Compatible
Compatible with Barco ClickShare Conference (CX-20, CX-30 & CX-50)
Operating systems
NO driver installation necessary!
Windows 7 and above (32/64-bit)
macOS 10.10 and above
Linux (kernel v2.6.38)
Consumed USB tiers
2 tiers
The device is a USB composite device connected to an embedded USB hub.
USB tiers between USB cameras and the device are not reported to the connected host. The device acts in some way as a “tier resetter.”
Minimum host requirements
USB 2.0 port – We recommend USB 3.0 for uncompressed video
4GB RAM
Intel Core i5 or equivalent
Graphic card with dedicated memory
Supported cameras
Depends on the camera specifications
Software Compatibility
UVC-compliant. Runs with all software compatible to DirectShow, AVFoundation and V4L2.
Compatible to: Teams, Zoom, Webex, Google Meet, etc.
Physical details
Dimensions (W x L x H)
18.5 cm x 11.0 cm x 3.0 cm
7.28” x 4.33” x 1.18”
Power supply
12V (100-240 VAC 50/60Hz to 12V/1.2A DC)
Weight
560 g (1.23 lb)
Package content
1x 1m/3.3ft USB 3.0 cable (Type-A to Type-B)
1x RS-232 terminal block adapter
1x power supply 100-240 VAC 50/60Hz to 12V/1.2A DC
International adapters included in the box (AUS, EUR, UK and US)
Operating temperature
0° to 45° C
32° to 113° F
Storage temperature
-40° to 105° C
-40° to 221° F
Relative humidity
0% to 90% non-condensing
Informations
UPC code
040232633843
Origin
Canada
Warranty
5 years: Products purchased by the end-user after August 1, 2024
2 years: Products purchased by the end-user before to August 1, 2024
Certifications
HDCP-compliant
The INOGENI device does not decrypt BD/DVD movies, satellite/cable receivers or other encrypted sources.
Certifications
FCC, CE, RoHS, IEC62368, SoV, RCM, KC, NOM
TAA-compliant
Yes
What's in the box
- 1x 1m/3.3ft USB 3.0 cable (Type-A to Type-B)
- 1x RS-232 terminal block adapter
- 1x power supply 100-240 VAC 50/60Hz to 12V/1.2A DC
- International adapters included in the box (AUS, EUR, UK and US)
